Skip to content
FlexoCommand.comFLEXO COMMAND CENTER

Category

Flexo vs Digital

Flexo vs Digital

LEP Digital Press Cost Per Meter, Explained

LEP costs run by the metre, not the impression. Here's how to convert that into the per-label number your quote needs.

FlexoCommand.comJul 2, 20266 min read
Flexo vs Digital

Click-Charge Estimating for Digital Label Jobs

Estimating a click-charge job is different from flexo — there are no plates and the cost per unit barely moves. Here's the full build.

FlexoCommand.comJul 1, 20267 min read
Flexo vs Digital

Which Press Should I Run This Label Job On?

Press routing shouldn't be a habit. Here's a decision frame that turns 'which press?' into a number you can defend.

FlexoCommand.comJun 24, 20267 min read
Flexo vs Digital

When Is Digital Printing Cheaper Than Flexo?

Digital is cheaper more often than flexo shops assume — and less often than digital vendors claim. Here's the honest boundary.

FlexoCommand.comJun 23, 20269 min read
Flexo vs Digital

Digital vs Flexo Break-Even Point for Label Jobs

The break-even is the crossover in different words — and it moves with plate cost, makeready waste and your click rate. Here's the mechanism.

FlexoCommand.comJun 22, 20269 min read
Flexo vs Digital

Flexo vs Digital Label Printing: The Estimator's Guide

The honest estimator's comparison of flexo and digital label printing: what each costs, where quality differs, and why the answer is a crossover, not a winner.

FlexoCommand.comJun 19, 202612 min read