Tag

anilox

Production & Tooling

Anilox Wear and Volume Loss: When to Re-Engrave or Replace

An anilox roll doesn't print the same on day 1,000 as day one. Here's how volume loss shows up and when it's time to re-engrave or replace.

FlexoCommand.comOct 13, 20267 min read

Production & Tooling

Pick the wrong anilox and colour and coverage suffer. Here's how to choose BCM by what the label actually demands.

FlexoCommand.comJul 23, 20267 min read

Production & Tooling

BCM is the number that decides how much ink an anilox lays down. Here's how to read a volume chart and match it to the work.

FlexoCommand.comJul 22, 20268 min read